HP-P150PDS 150W Power Supply
Product line：Industrial Power SupplyMarket value：0.00
HP-P150PDS is an industrial power supply which is design for the POE switches and POE injectors use. The max output power is 150W with a wide range AC input voltage from 90Vac to 264Vac. The output power is one channel +5V, 4A, and the other channel is -52.5V, 2.6A. The power have the power factor correction, output short circuit protection, output over current protection, Output overvoltage protection, PG monitor signal and Over temperature protection functions, etc. The whole power is design under Safety requirements.
Online Purchase
- Product Brief
- Customer message
|
Specification Sheet:
|
|
Model
Specification
|
HP-P150PDS
|
|
Output Specification
|
output voltage
|
V1 52.5V
|
V2 12.0V
|
|
Rated Current
|
1.65A
|
6A
|
|
Current Range
|
0---1.65A
|
0---6A
|
|
Ripple Wave
|
300mVp-p
|
150mVp-p
|
|
Output Accuracy
|
±2%
|
±2%
|
|
Line Regulation
|
±1%
|
±1%
|
|
Load Regulation
|
±1%
|
±1%
|
|
Rating Power
|
150W
|
|
Connect, recover and remain time
|
500ms , 25ms, 40ms/220VAC
|
|
Input Specification
|
Input Voltage Range
|
90V---264V AC ; 120V---360V DC
|
|
Input Current
|
1.8A/110V; 1.0A/220V;
|
|
Frequency Range
|
47---63Hz
|
|
Efficiency
|
≥85% 100V
|
|
PF data
|
0.98/220VAC
|
|
Impact Current
|
COLD START : 35A /230VAC
|
|
Leakage Current
|
＜3.5mA（AC input to the land）
|
|
Protection Features
|
overload protection
|
105%-150% Rating Power, auto recovery
|
|
overvoltage protection
|
V1 : 50V-55V
|
V2: 13.5V-14.5V
|
|
Output short circuit protection
|
The power supply will not broken after long time output short-circuit, remove the short-circuit, the power can recover work.
|
|
Over temperature protection
|
Auto recover
|
|
Other Functions:
|
|
Environmental Features
|
Working Temperature, Humidity
|
-20～+50℃@100%LOAD， +60℃@60%LOAD, 20%~90%RH
|
|
Storage Temperature, Humidity
|
-20～+85℃ , 10%~95%RH
|
|
Temperature Range
|
±0.03%/℃（0-50℃）
|
|
Heating Way
|
Auto
|
|
Safety and EMC standard
|
Safety Standard
|
UL 60950-2003
|
|
High-voltage Holding Test
|
I/P-O/P:3KV; I/P-FG:2.0KV; O/P-FG:500VAC 10ｍＡ，1Min
|
|
Insulation resistance
|
I/P-O/P; I/P-FG; O/P-FG:500VAC 1００Ｍ
|
|
Other specification
|
Size
|
154mm*82mm*24mm
|
|
Weight
|
350±20g
|
|
Remark
|
-
All the data is recorded by the test with Input 220VAC, rating load, 25 Degree working temperature, 70% Humidity.
-
Precision include setting error, Line change rate, load change rate, etc.
-
Ripple Wave Test: Use 30cm cable to connect the power and the load, the load is parallel connected with 0.1uf and 47uf capacitors, use 20M OSC test the load part to get the result.
-
Line Regulation: Under rating load, the test is based on the low input voltage change to high input voltage.
-
Load Regulation: The test is based on the change between the 0 Load and 100% load.
|