Specification Sheet

Model

Specification

LST-1210-9-CP

Output Specification

Output Voltage

(Voltage adjustable:±10%rated output voltage)

Rated Current

10A

Output Channels

9

Single Channel Current Range

0---1.1A

Ripple Wave

<120mVp-p

Output Accuracy

±5%

Line Regulation

±2%

Load Regulation

±5%

Rated Power

120W

Single Channel Output Power

13.3W

Output Startup time

≤2S@120VAC≤1.0S@230VAC

Output holding time

≥10mS@120VAC,≥20mS@230VAC

Input

Input voltage range

90V---265V AC

Normal Operating Voltage Range

100V---240V AC

Input Current

2A/110V;   1A/220V;

Frequency Range

47---63Hz

Efficiency

≥85%

Protection

Over-load protection

105%-150%Rated power, auto recovery

Output over-voltage protection

110%-120%Rated voltage

Output     short-circuit protection

When short-current occurs, the power supply will automatically switch to self-protection status. When condition removed, then switch back to normal.

Over-temperature protection

/

Other functions

Environmental Features

Working temperature & humidity

-20～+40℃@100%LOAD，  +60℃@60%LOAD,    20%~90%RH

Storage Temperature & Humidity

-20～+85℃  ,   10%~95%RH

Cooling Way

Auto

Safety & EMC

Safety Standard

EN/UL60950

Design reference EN/UL60950

EMC Standards

EN55022 Class B;

Design reference EN55022 Class B;

High-voltage

Holding Test

I/P-O/P：  3KV AC，  10ｍＡ，60S

Insulation Resistance

I/P-O/P：  500VAC   100ＭΩ

Shape & Weight

Weight

1000±10g

Dimensions

L255*W208*H90mm

Remark

1,  All the data is recorded by the test with Input 220VAC, rating load, 25 Degree working temperature, 70% Humidity.

2,    Precision include setting error, Line change rate, load change rate, etc.

3,    Ripple Wave Test: Use 30cm cable to connect the power and the load, the load is parallel connected with 0.1uf and 47uf capacitors, use 20M OSC test the load part to get the result.

4,    Line Regulation: Under rated load, the test is based on the low input voltage change to high input voltage.

5,   Load Regulation Rate: The test is based on the change between the 0 Load and 100% load.